Maintenance Products

This TMFT36A10-26 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size A10-26.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF jaw pullers are one of the most common tools for dismounting small to medium size bearings, the SKF puller helps to safeguard against damage to the bearing or the seating during dismount.Related DocumentsProduct Data Sheet  Instructions...

This TMMR16/35XL-4 is a replacement set of extension arms, 125mm long, for TMMR160F and TMMR200F reversable jaw pullers.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF TWIM15 induction heater is a lightweight, portable and highly efficient bearing heater, equipped with a temperature and time controller and an automatic demagnetisation. this heater is perfect for bearings with a minimum bore diameter of 20mm to...

The SKF 729659C electric hot plate is a device especially designed for preheating batches of small bearings prior to mounting, the flat surface of the hot plate ensures an even heating across the bearing and the cover helps to retain heat and keep...

When wear and damage occur on a shaft, SKF Speedi-Sleeves are the solution.In order to perform their function properly, shaft seals must be seated on a smooth, round shaft face. If the shaft face becomes worn the seal can no longer perform as necessary,...

When wear and damage occur on a shaft, SKF Speedi-Sleeves are the solution.In order to perform their function properly, shaft seals must be seated on a smooth, round shaft face. If the shaft face becomes worn the seal can no longer perform as necessary,...

When wear and damage occur on a shaft, SKF Speedi-Sleeves are the solution.In order to perform their function properly, shaft seals must be seated on a smooth, round shaft face. If the shaft face becomes worn the seal can no longer perform as necessary,...

When wear and damage occur on a shaft, SKF Speedi-Sleeves are the solution.In order to perform their function properly, shaft seals must be seated on a smooth, round shaft face. If the shaft face becomes worn the seal can no longer perform as necessary,...

This HN8-9 SKF hook spanner is designed for use with SKF KM nuts as well as any other KM nuts conforming to the DIN981 standard.Related DocumentsProduct Data Sheet 

LAGN 120 Grease Nipples Pack ContentM6x1 Straight Typex30 M8x1 Straight Typex20 M10x1 Straight Typex10 G1/8 Straight Typex10 M6x1 45° Typex5 M8x1 45° Typex10 M10x1 45° Typex5 G1/8 45° Typex5 M6x1...

This LAPF M1/4 is a G1/4 male tube connection for SKF system 24 automatic lubricators.Related DocumentsProduct Data Sheet 

This LAPF M3/8 is a G3/8 male tube connection for SKF system 24 automatic lubricators.Related DocumentsProduct Data Sheet 

This SM16-CS is an SKF vibracon adjustable chock, This chock provides an economic solution for environmentally less demanding applications, while guaranteeing a lifetime reliable chocking.Related DocumentsProduct Data Sheet  Instructions for...

This SM20-SS is a stainless steel vibracon adjustable chock, designed to met harsh conditions where requirements cannot be met by carbon steel surface treated chocks. Mating surfaces are treated with additives to avoid the parts seizing when rotated...

This TIH030/230v is a small induction heater that combines high heating capacity with portability. This induction heater is equipped with thermal overheating protection to reduce the risk of damage to the induction coil and the electronics. This heating...

This TIH100-Y2 is a replacement standard yoke 14x14x296mm for use on the TIH100 series medium induction heaters.Related DocumentsProduct Data Sheet  Instructions for Use 

This TLMR1-3 is a replacement bracket spare parts kit for the TLMR electro mechanical single point automatic lubricant dispenser.Related DocumentsProduct Data Sheet  Instructions for Use 

This TLMR201 is an electro-mechanical single point automatic lubricant dispenser, this dispenser has a relatively high pressure of 30 bars and can operate at long distances providing optimum results with difficult to reach and unsafe lubrication...

SKF impact spanners help avoid nut and shaft damage, special wide impact face means the impact is applied effectivley to the nut.Related DocumentsProduct Data Sheet 

This TMFT36A10-30 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size A10-30.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMFT36B20-47 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size B20-47.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMFT36C is a replacement set of size C impact rings for the TMFT36 bearing fitting tool kit.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMIPE20-28 is a replacement extractor TMIP, collet size 20-28mm for the SKF internal bearing puller kits.Related DocumentsProduct Data Sheet  Instructions for Use 

SKF Provide a wide range of connection nipples covering many different sizes and thread combinations, they are used as adapters to enable hoses and pipes to be connected to different thread sizes.Related DocumentsProduct Data Sheet 

This 729124 hydraulic pump is suitable for use with SKF hydraulic nuts (up to HMV54E) and for mounting and dismounting bearings or components where a maximum pressure of 100MPa is required.Related DocumentsInstructions for Use 

Technical Datad1G¼  D122 mm / 0.87 inch B14mm / 0.55 inch A46 mm / 1.81 inch Max. Pressure150MPa / 21750 psi Related DocumentsProduct Data Sheet 

The SKF 909792 is a spare part valve screw designed specifically for use with the SKF 226400 oil injector. Built for durability and optimal performance, this spare part ensures reliable operation and a secure fit, maintaining the integrity and efficiency...

This LAPE35 is a 35mm connector extension for SKF system 24 automatic lubricators.Related DocumentsProduct Data Sheet 

This TIH030-Y6 is a replacement optional yoke 40x40x215mm for use on the TIH030 series small induction heaters.Related DocumentsProduct Data Sheet  Instructions for Use 

SKF Tachometers are fast and accurate instruments utilizing laser or contact to measure rotational and linear speeds.MeasurementRelated DocumentsProduct Data Sheet  Instructions for Use 

This TKSA41-EXTCH is a replacement extension chain for the SKF TKSA41 shaft alignement tool.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSA51-M is a replacement M measuring unit including USB cable for the TKSA51 shaft alignment tool.Related DocumentsProduct Data Sheet  Instructions for Use 

SKF thermocouple probes for use with SKF infrared thermometers; TKTL20, TKTL 30 and TKTL 40.

This TMFT36B25-52 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size B25-52.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMMR25/35XL-1 is a replacement set of long arms, 275mm long with nose piece, for TMMR250F and TMMR350F reversable jaw pullers.Related DocumentsProduct Data Sheet  Instructions for Use 

This 226402 SKF adapter block is for the 226400E SKF oil injector, it consists of a cast steel block, a floor support and a 90° connection nipple for the oil reservoir. A high pressure pipe and pressure guage can be connected to this adater block.Related...

This 728383 is a repair kit for the SKF 226400 Oil Injector.Related DocumentsProduct Data Sheet  Instructions for Use 

This 729124-5 is a replacement oil container tube for the 729124 hydraulic pump.Related DocumentsProduct Data Sheet  Instructions for Use 

This HN2-3 SKF hook spanner is designed for use with SKF KM nuts as well as any other KM nuts conforming to the DIN981 standard.Related DocumentsProduct Data Sheet 

This HN21-22 SKF hook spanner is designed for use with SKF KM nuts as well as any other KM nuts conforming to the DIN981 standard.Related DocumentsProduct Data Sheet 

This LAOS09224 is a 5 litre (1.3 US gal) drum, designed with a wide neck and a standard thread size, it fits any LAOS lid and is available in 4 other sizes.Related DocumentsProduct Data Sheet 

This LAPB3x10E1 is a 30x100mm brush for oil filled SKF system 24 lubricators.Related DocumentsProduct Data Sheet 

This LAPP6 is a protective cap for SKF system 24 automatic lubricators.Related DocumentsProduct Data Sheet 

This THAPE-2 is a replacement set of hoses for the THAP SKF air driven pumps and oil injectors.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIH030-Y4 is a replacement standard yoke 28x28x215mm for use on the TIH030 series small induction heaters.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMFT36B20-42 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size B20-42.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMFT36B35-62 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size B35-62.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMHP10E-12 is a replacement 285mm long arm for the TMHP10E jaw puller.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF jaw pullers are one of the most common tools for dismounting small to medium size bearings, the SKF puller helps to safeguard against damage to the bearing or the seating during dismount.Related DocumentsProduct Data Sheet  Instructions...

This TMRT1-57 is a replacement contact adaptor for the TMRT1 and TKRT 20 multi functional digital tachometer.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF Bearing Packer has been designed to completely fill open type bearings such as tapered roller bearings. they can be used with a standard grease gun, air-operated grease pump or a grease filler pump.Related DocumentsProduct Data...

This 1077597-1 SKF is a 90° filter nipple for the SKF 226402 adapter block.Related DocumentsProduct Data Sheet 

This 1077600H is an SKF Grease Gun with a flexible 500mm (19.7in) long pressure hose with hydraulic gripping nozzle, ideal for industrial, construction and agricultural industries.Related DocumentsProduct Data Sheet  Instructions for Use 

This 226400E SKF oil injector is suitable for many applications, this oil injector is supplied with an oil reservoir and a compact carry case.Related DocumentsProduct Data Sheet  Instructions for Use 

This 226402-1 SKF gauge nipple is for use on the 226402 SKF adapter block.Related DocumentsProduct Data Sheet  Instructions for Use 

This 729126 is a flexible high pressure hose 100MPa for the 729124 hydraulic pump, this hose is 1.5m long.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF 729659C electric hot plate is a device especially designed for preheating batches of small bearings prior to mounting, the flat surface of the hot plate ensures an even heating across the bearing and the cover helps to retain heat and keep...

When wear and damage occur on a shaft, SKF Speedi-Sleeves are the solution.In order to perform their function properly, shaft seals must be seated on a smooth, round shaft face. If the shaft face becomes worn the seal can no longer perform as necessary,...

The unique design of the SKF HN../SNL hook spanners, allows it to be used inside the SNL and SNH bearing housings. the large contact area of the hook spanner provides excellent grip and force on the nut.Related DocumentsProduct Data Sheet 

This LAOS09224 is a 1.5 litre (0.4 US gal) drum, designed with a wide neck and a standard thread size, it fits any LAOS lid and is available in 4 other sizes.Related DocumentsProduct Data Sheet 

This LAPT1000SW is an extra strong 1m long flexible tube, 8x6mm, for SKF system 24 automatic lubricators.Related DocumentsProduct Data Sheet 

This TIH030-Y7 is a replacement standard yoke 45x45x215mm for use on the TIH030 series small induction heaters.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIH100-P230v is a replacement power print for the TIH100/230v medium induction heater.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIH220-Y6 is a replacement standard yoke 40x40x430mm for use on the TIH220 series large induction heaters.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSA11 is an innovative shaft alignment tool that uses tablets and smartphones to guide the user through the shaft alignment process. .Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSA41-S is a replacement S measuring unit including USB cable for the TKSA41 shaft alignment tool.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSAROD150 is 4x replacement threaded rods of 150mm for the TKSA31 and TKSA41 shaft alignment tool.Related DocumentsProduct Data Sheet 

This TLMP1008/24DC is an SKF multi point automatic lubricator designed for reliable relubrication of multiple lubrication points. This automatic lubricatior has the ability to supply from one to eight lubrication points and is easy to install and program...

This TMAS380-CB is a replacement case for the TMAS380 shim kit.Related DocumentsProduct Data Sheet 

SKF machinery shims are used for accurate machine adjustments, the single slot pre-cut shims are available in five different dimensions and in ten thicknesses.Related DocumentsProduct Data Sheet 

The SKF heat and oil resistant gloves have been specially designed tfor the handling of hot and oily bearings, able to handle temperatures up to 250°C, and offer cut, oil, water, melt and burn resistance.Related DocumentsProduct Data...

This TMFT36B35-72 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size B35-72.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMMR250F-3 is a replacement spindle for the SKF TMMR250F reversible jaw puller.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF jaw pullers are one of the most common tools for dismounting small to medium size bearings, the SKF puller helps to safeguard against damage to the bearing or the seating during dismount.Related DocumentsProduct Data Sheet  Instructions...

Designed to fit SKF hydraulic pumps and oil injectors, this 1077587 SKF pressure guage is liquid filled and/or equipped with a restriction screw to absorb any sudden pressure drop to help prevent damage, this pressue guage is also fitted with safety...

The SKF pressue gauges have been designed to fit SKF hydraulic pums and oil injectors. The gauges are all liquid filled and equipped with a restriction screw in order to absorb any sudden pressure drop, preventing damage.Related DocumentsProduct Data...

When wear and damage occur on a shaft, SKF Speedi-Sleeves are the solution.In order to perform their function properly, shaft seals must be seated on a smooth, round shaft face. If the shaft face becomes worn the seal can no longer perform as necessary,...

When wear and damage occur on a shaft, SKF Speedi-Sleeves are the solution.In order to perform their function properly, shaft seals must be seated on a smooth, round shaft face. If the shaft face becomes worn the seal can no longer perform as necessary,...

When wear and damage occur on a shaft, SKF Speedi-Sleeves are the solution.In order to perform their function properly, shaft seals must be seated on a smooth, round shaft face. If the shaft face becomes worn the seal can no longer perform as necessary,...

When wear and damage occur on a shaft, SKF Speedi-Sleeves are the solution.In order to perform their function properly, shaft seals must be seated on a smooth, round shaft face. If the shaft face becomes worn the seal can no longer perform as necessary,...

When wear and damage occur on a shaft, SKF Speedi-Sleeves are the solution.In order to perform their function properly, shaft seals must be seated on a smooth, round shaft face. If the shaft face becomes worn the seal can no longer perform as necessary,...

When wear and damage occur on a shaft, SKF Speedi-Sleeves are the solution.In order to perform their function properly, shaft seals must be seated on a smooth, round shaft face. If the shaft face becomes worn the seal can no longer perform as necessary,...

The SKF hydraulic nuts are used to facilitate easy and quick application of the high drive-up forces required for mounting bearings.Related DocumentsProduct Data Sheet  Instructions for Use 

This HMV40/233983 is a replacement o-ring set for the SKF HMV40E SKF hydraulic nut.Related DocumentsProduct Data Sheet  Instructions for Use 

The unique design of the SKF HN hook spanners, allows it to be used inside the SNL and SNH bearing housings. the large contact area of the hook spanner provides excellent grip and force on the nut.Related DocumentsProduct Data Sheet 

The unique design of the SKF HN../SNL hook spanners, allows it to be used inside the SNL and SNH bearing housings. the large contact area of the hook spanner provides excellent grip and force on the nut.Related DocumentsProduct Data Sheet 

The unique design of the SKF HN../SNL hook spanners, allows it to be used inside the SNL and SNH bearing housings. the large contact area of the hook spanner provides excellent grip and force on the nut.Related DocumentsProduct Data Sheet 

The unique design of the SKF HN../SNL hook spanners, allows it to be used inside the SNL and SNH bearing housings. the large contact area of the hook spanner provides excellent grip and force on the nut.Related DocumentsProduct Data Sheet 

The unique design of the SKF HN../SNL hook spanners, allows it to be used inside the SNL and SNH bearing housings. the large contact area of the hook spanner provides excellent grip and force on the nut.Related DocumentsProduct Data Sheet 

This LAOS09422 is a pump reducer nozzle compatible with both standard pumps as well as high viscosity pumps.

This SM16-SS is a stainless steel vibracon adjustable chock, designed to met harsh conditions where requirements cannot be met by carbon steel surface treated chocks. Mating surfaces are treated with additives to avoid the parts seizing when rotated...

This SM30-CSTR is a surface treated vibracon chock, this chock has been specially developed to deal with humid and salty climates where protection against corrosion is recommended, all parts of this chock are treated individually to guarantee an optimal...

This SMSW16-ASTR is an SKF spherical washer designed to create an exact, parrallel plane between the bolt head and the face of the nut. These washers automatically adjust and compensate for the angular deviation between planes and prevent the bolt from...

This SMSW16-LPAST is an SKF low profile spherical washer designed to create an exact, parrallel plane between the bolt head and the face of the nut. These washers automatically adjust and compensate for the angular deviation between planes and prevent...

This THAPE-11 is a replacement gauge plug assembly for the THAP SKF air driven pumps and oil injectors.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIH030-P110v is a replacement power print for the TIH030/110v small induction heater.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIH030-Y3 is a replacement optional yoke 20x20x215mm for use on the TIH030 series small induction heaters.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIH100/MV is a medium induction heater that offers the same high standards of efficiency and performance as the smaller heater, combined with increased capacity. This induction heater is equipped with thermal overheating protection to reduce the...

This TKED1-1 is a replacement antenna for use on the SKF TKED1 electrical discharge detector pen.Related DocumentsProduct Data Sheet  Instructions for Use