Maintenance Tools

This TMFT36A10-30 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size A10-30.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMFT36C is a replacement set of size C impact rings for the TMFT36 bearing fitting tool kit.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMIP7-28-CX is a replacement toolcase with inlay for TMIP7-28 internal bearing puller kit.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMMR250F-1 is a replacement arm for the SKF TMMR250F reversible jaw puller.Related DocumentsProduct Data Sheet  Instructions for Use 

SKF Provide a wide range of connection nipples covering many different sizes and thread combinations, they are used as adapters to enable hoses and pipes to be connected to different thread sizes.Related DocumentsProduct Data Sheet 

This 1077600-1 is an extension pipe for suitable for the 1077600 and TLGH 1 SKF Grease Guns.Related DocumentsProduct Data Sheet  Instructions for Use 

Product DescriptionHigh quality O ring kitSupplied in storage boxOil/hydraulic oil resistantUK dispatch free delivery!Image for representative purposes only

This LAPE35 is a 35mm connector extension for SKF system 24 automatic lubricators.Related DocumentsProduct Data Sheet 

This TIH030-Y2 is a replacement standard yoke 14x14x215mm for use on the TIH030 series small induction heaters.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSA41-EXTCH is a replacement extension chain for the SKF TKSA41 shaft alignement tool.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSA51-M is a replacement M measuring unit including USB cable for the TKSA51 shaft alignment tool.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSA51-ROD120 is 4x replacement threaded rods of 120mm for the TKSA51 shaft alignment tool.Related DocumentsProduct Data Sheet  Instructions for Use 

SKF thermocouple probes for use with SKF infrared thermometers; TKTL20, TKTL 30 and TKTL 40.

SKF impact spanners help avoid nut and shaft damage, special wide impact face means the impact is applied effectivley to the nut.Related DocumentsProduct Data Sheet 

This TMMR25/35XL-1 is a replacement set of long arms, 275mm long with nose piece, for TMMR250F and TMMR350F reversable jaw pullers.Related DocumentsProduct Data Sheet  Instructions for Use 

This 226402 SKF adapter block is for the 226400E SKF oil injector, it consists of a cast steel block, a floor support and a 90° connection nipple for the oil reservoir. A high pressure pipe and pressure guage can be connected to this adater block.Related...

This 728383 is a repair kit for the SKF 226400 Oil Injector.Related DocumentsProduct Data Sheet  Instructions for Use 

This 920100b is a replacement oil reservoir for the SKF oil injector.Related DocumentsProduct Data Sheet  Instructions for Use 

This HN2-3 SKF hook spanner is designed for use with SKF KM nuts as well as any other KM nuts conforming to the DIN981 standard.Related DocumentsProduct Data Sheet 

This LAOS09224 is a 5 litre (1.3 US gal) drum, designed with a wide neck and a standard thread size, it fits any LAOS lid and is available in 4 other sizes.Related DocumentsProduct Data Sheet 

This LAPB3x10E1 is a 30x100mm brush for oil filled SKF system 24 lubricators.Related DocumentsProduct Data Sheet 

This LAPP6 is a protective cap for SKF system 24 automatic lubricators.Related DocumentsProduct Data Sheet 

This TIH030-Y4 is a replacement standard yoke 28x28x215mm for use on the TIH030 series small induction heaters.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMFT36B20-42 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size B20-42.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMHP10E-12 is a replacement 285mm long arm for the TMHP10E jaw puller.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF jaw pullers are one of the most common tools for dismounting small to medium size bearings, the SKF puller helps to safeguard against damage to the bearing or the seating during dismount.Related DocumentsProduct Data Sheet  Instructions...

The SKF Bearing Packer has been designed to completely fill open type bearings such as tapered roller bearings. they can be used with a standard grease gun, air-operated grease pump or a grease filler pump.Related DocumentsProduct Data...

This 1077597-1 SKF is a 90° filter nipple for the SKF 226402 adapter block.Related DocumentsProduct Data Sheet 

This 1077600-2 is an SKF filling nipple for SKF 1077600 Grease Gun, ideal for industrial, construction and agricultural industries.Related DocumentsProduct Data Sheet  Instructions for Use 

This 1077600H is an SKF Grease Gun with a flexible 500mm (19.7in) long pressure hose with hydraulic gripping nozzle, ideal for industrial, construction and agricultural industries.Related DocumentsProduct Data Sheet  Instructions for Use 

This 226400E SKF oil injector is suitable for many applications, this oil injector is supplied with an oil reservoir and a compact carry case.Related DocumentsProduct Data Sheet  Instructions for Use 

This 226402-1 SKF gauge nipple is for use on the 226402 SKF adapter block.Related DocumentsProduct Data Sheet  Instructions for Use 

This 729126 is a flexible high pressure hose 100MPa for the 729124 hydraulic pump, this hose is 1.5m long.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF 729659C electric hot plate is a device especially designed for preheating batches of small bearings prior to mounting, the flat surface of the hot plate ensures an even heating across the bearing and the cover helps to retain heat and keep...

The unique design of the SKF HN../SNL hook spanners, allows it to be used inside the SNL and SNH bearing housings. the large contact area of the hook spanner provides excellent grip and force on the nut.Related DocumentsProduct Data Sheet 

This LAOS09224 is a 1.5 litre (0.4 US gal) drum, designed with a wide neck and a standard thread size, it fits any LAOS lid and is available in 4 other sizes.Related DocumentsProduct Data Sheet 

This LAPT1000SW is an extra strong 1m long flexible tube, 8x6mm, for SKF system 24 automatic lubricators.Related DocumentsProduct Data Sheet 

This TIH100-P230v is a replacement power print for the TIH100/230v medium induction heater.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSA11 is an innovative shaft alignment tool that uses tablets and smartphones to guide the user through the shaft alignment process. .Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSA41-S is a replacement S measuring unit including USB cable for the TKSA41 shaft alignment tool.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSAROD150 is 4x replacement threaded rods of 150mm for the TKSA31 and TKSA41 shaft alignment tool.Related DocumentsProduct Data Sheet 

This TLMP1008/24DC is an SKF multi point automatic lubricator designed for reliable relubrication of multiple lubrication points. This automatic lubricatior has the ability to supply from one to eight lubrication points and is easy to install and program...

This TMAS380-CB is a replacement case for the TMAS380 shim kit.Related DocumentsProduct Data Sheet 

SKF machinery shims are used for accurate machine adjustments, the single slot pre-cut shims are available in five different dimensions and in ten thicknesses.Related DocumentsProduct Data Sheet 

The SKF strong bac pullers facilitate the dismounting of bearings where the lack of space or demands for long reach means traditional jaw pullers are not suitable.TMBS 150E Pack ContentSeparator Setx1 Main Rodsx2 125mm / 4.9in. Extension...

SKF axial lock nut sockets require less space around the bearing arrangement than hook spanners, and fit nuts from the KM, KMK and KMF seriesRelated DocumentsProduct Data Sheet 

SKF axial lock nut sockets require less space around the bearing arrangement than hook spanners, and fit nuts from the KM, KMK and KMF seriesRelated DocumentsProduct Data Sheet 

This TMFT36B35-72 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size B35-72.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF jaw pullers are one of the most common tools for dismounting small to medium size bearings, the SKF puller helps to safeguard against damage to the bearing or the seating during dismount.Related DocumentsProduct Data Sheet  Instructions...

Designed to fit SKF hydraulic pumps and oil injectors, this 1077587 SKF pressure guage is liquid filled and/or equipped with a restriction screw to absorb any sudden pressure drop to help prevent damage, this pressue guage is also fitted with safety...

The SKF pressue gauges have been designed to fit SKF hydraulic pums and oil injectors. The gauges are all liquid filled and equipped with a restriction screw in order to absorb any sudden pressure drop, preventing damage.Related DocumentsProduct Data...

When wear and damage occur on a shaft, SKF Speedi-Sleeves are the solution.In order to perform their function properly, shaft seals must be seated on a smooth, round shaft face. If the shaft face becomes worn the seal can no longer perform as necessary,...

This HMV40/233983 is a replacement o-ring set for the SKF HMV40E SKF hydraulic nut.Related DocumentsProduct Data Sheet  Instructions for Use 

The unique design of the SKF HN hook spanners, allows it to be used inside the SNL and SNH bearing housings. the large contact area of the hook spanner provides excellent grip and force on the nut.Related DocumentsProduct Data Sheet 

The unique design of the SKF HN../SNL hook spanners, allows it to be used inside the SNL and SNH bearing housings. the large contact area of the hook spanner provides excellent grip and force on the nut.Related DocumentsProduct Data Sheet 

The unique design of the SKF HN../SNL hook spanners, allows it to be used inside the SNL and SNH bearing housings. the large contact area of the hook spanner provides excellent grip and force on the nut.Related DocumentsProduct Data Sheet 

The unique design of the SKF HN../SNL hook spanners, allows it to be used inside the SNL and SNH bearing housings. the large contact area of the hook spanner provides excellent grip and force on the nut.Related DocumentsProduct Data Sheet 

The unique design of the SKF HN../SNL hook spanners, allows it to be used inside the SNL and SNH bearing housings. the large contact area of the hook spanner provides excellent grip and force on the nut.Related DocumentsProduct Data Sheet 

This HN8-9 SKF hook spanner is designed for use with SKF KM nuts as well as any other KM nuts conforming to the DIN981 standard.Related DocumentsProduct Data Sheet 

This LAOS09422 is a pump reducer nozzle compatible with both standard pumps as well as high viscosity pumps.

This SM16-SS is a stainless steel vibracon adjustable chock, designed to met harsh conditions where requirements cannot be met by carbon steel surface treated chocks. Mating surfaces are treated with additives to avoid the parts seizing when rotated...

This SM30-CSTR is a surface treated vibracon chock, this chock has been specially developed to deal with humid and salty climates where protection against corrosion is recommended, all parts of this chock are treated individually to guarantee an optimal...

This SMSW16-ASTR is an SKF spherical washer designed to create an exact, parrallel plane between the bolt head and the face of the nut. These washers automatically adjust and compensate for the angular deviation between planes and prevent the bolt from...

This SMSW16-LPAST is an SKF low profile spherical washer designed to create an exact, parrallel plane between the bolt head and the face of the nut. These washers automatically adjust and compensate for the angular deviation between planes and prevent...

This THAPE-11 is a replacement gauge plug assembly for the THAP SKF air driven pumps and oil injectors.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIH030-P110v is a replacement power print for the TIH030/110v small induction heater.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIH030-Y3 is a replacement optional yoke 20x20x215mm for use on the TIH030 series small induction heaters.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKED1-1 is a replacement antenna for use on the SKF TKED1 electrical discharge detector pen.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSA41 is a laser shaft alignment system with enhanced measuring and reporting. This alignment tool performs precise measurements in even the most challenging conditions. The ergonimic display unit with intuituve touch screen navigation makes...

This TKSA41-M is a replacement M measuring unit including USB cable for the TKSA41 shaft alignment tool.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSAMAGVBK is a replacement magnetic V-bracket for TKSA series shaft alignment system.Related DocumentsProduct Data Sheet 

SKF machinery shims are used for accurate machine adjustments, the single slot pre-cut shims are available in five different dimensions and in ten thicknesses.Related DocumentsProduct Data Sheet 

The SKF oil check monitor measures the changes in dielectric constant of an oil sample, by comparing measurements obtained from used and fresh samples of the same oil, the degree of change in the condition is established Related DocumentsProduct Data...

SKF impact spanners help avoid nut and shaft damage, special wide impact face means the impact is applied effectivley to the nut.Related DocumentsProduct Data Sheet 

SKF axial lock nut sockets require less space around the bearing arrangement than hook spanners, and fit nuts from the KM, KMK and KMF seriesRelated DocumentsProduct Data Sheet 

This TMFT36A15-32 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size A15-32.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMFT36A17-35 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size A17-35.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMFT36B20-47 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size B20-47.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMFT36B20-52 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size B20-52.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMFT36B30-62 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size B30-62.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMFT36C40-80 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size C40-80.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMFT36C50-110 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size C50-11.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF internal bearing puller kit has been specially designed for dismounting bearings from housings where the fit is on the outer ring. a combination of a unique spring-loaded extractor and an ergonomically designed sliding hammer hels enable a safe,...

This TMIPE20-28 is a replacement extractor TMIP, collet size 20-28mm for the SKF internal bearing puller kits.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMMR200F-3 is a replacement spindle for the SKF TMMR200F reversible jaw puller.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF jaw pullers are one of the most common tools for dismounting small to medium size bearings, the SKF puller helps to safeguard against damage to the bearing or the seating during dismount.Related DocumentsProduct Data...

The SKF puller protection blacnkets are designed to offer additional safety for the user while dismounting bearings.Related DocumentsProduct Data Sheet  Instructions for Use 

SKF Provide a wide range of connection nipples covering many different sizes and thread combinations, they are used as adapters to enable hoses and pipes to be connected to different thread sizes.Related DocumentsProduct Data Sheet 

SKF Provide a wide range of connection nipples covering many different sizes and thread combinations, they are used as adapters to enable hoses and pipes to be connected to different thread sizes.Related DocumentsProduct Data Sheet 

This 729124 hydraulic pump is suitable for use with SKF hydraulic nuts (up to HMV54E) and for mounting and dismounting bearings or components where a maximum pressure of 100MPa is required.Related DocumentsInstructions for Use 

This 729655/150mpa connection nipple is used to be able to connect the SKF hydraulic pumps to the work piece.Related DocumentsProduct Data Sheet 

This 729656/150mpa connection nipple is used to be able to connect the SKF hydraulic pumps to the work piece.Related DocumentsProduct Data Sheet 

Technical Datad1G¼  D122 mm / 0.87 inch B14mm / 0.55 inch A46 mm / 1.81 inch Max. Pressure150MPa / 21750 psi Related DocumentsProduct Data Sheet 

This 729834 SKF flexible high pressure hose is designed to be used together with the SKF 729831A quick connect coupling and SKF 729832A nipple on the range of SKF hydraulic pumps, this hose is 3m long.Related DocumentsProduct Data Sheet 

This 909792 SKF valve screw is for us on the SKF 226400 oil injector.Related DocumentsProduct Data Sheet 

The SKF hydraulic nuts are used to facilitate easy and quick application of the high drive-up forces required for mounting bearings.Related DocumentsProduct Data Sheet  Instructions for Use 

This HN17 SKF hook spanner is designed for use with SKF KM nuts as well as any other KM nuts conforming to the DIN981 standard.Related DocumentsProduct Data Sheet 

The unique design of the SKF HN../SNL hook spanners, allows it to be used inside the SNL and SNH bearing housings. the large contact area of the hook spanner provides excellent grip and force on the nut.Related DocumentsProduct Data Sheet 

This HN4 SKF hook spanner is designed for use with SKF KM nuts as well as any other KM nuts conforming to the DIN981 standard.Related DocumentsProduct Data Sheet 

The unique design of the SKF HN../SNL hook spanners, allows it to be used inside the SNL and SNH bearing housings. the large contact area of the hook spanner provides excellent grip and force on the nut.Related DocumentsProduct Data Sheet