Adhesives & Lubricants

The LGMT 3 greases are perfect for general purpose in industrial and automovile sectors. They are composed by mineral oil using a lithium soap. They can opperate under a wide range of temperatures from -30 °C to 120 °C, equivalent to -20°F...

Shell Gadus S5 V460 2 is a multipurpose extreme pressure lithium complex grease for a wide range of bearing lubrication applications. It is based on high viscosity synthetic base oil, PAO, and a lithium complex soap thickener with the latest in additive...

KluberDuotempi PMY 4560gBrandTypeSizeTechnical Data SheetsTechnical Data Sheet: 

Loctite 641 retaining compound has been designed to deal with the bonding of cylindrical fitting parts, where dissassembly is required. This products has a medium strength and is ideal for the retention of bearings on shafts and in housingsLoctite641...

KluberKlubersynth UH1 14-151400gBrandTypeSizeTechnical Data SheetsTechnical Data Sheet: 

Loctite 7649 surface preparation activator is designed to increase the curing speed of anaerobic adhesives and sealants without any lost of joint strength. This solvent based activator is recommended when the application is below 15°C Loctite7649...

Molykote 3451 is a fluoro-silicone lubricating grease, ideal for metal/metal combinations with medium to high loads and slow to medium movements. This high performance lubricant has a wide service temperature from -40°C to +230°C and is resistant...

Molykote D321R is an anti friction coating ideal for metal/metal combinations with high loads and slow to medium movements. This air curing dry film lubricant is designed for the permanent lubrication of highly stressed sliding guides with low sliding...

AeroShell Grease 6 is a general purpose grease composed of a mineral oil thickened with microgel®, possessing good all-round properties within a limited range. It is inhibited against oxidation and corrosion and has good water resistance and low noise...

Shell Tonna S3 M oils are specially designed for the lubrication of machine tool slides, tables and feed mechanisms. Their enhanced tackiness and stick-slip characteristics are combined to offer superior frictional performance on slideways. They are...

Loctite 3430 is a 2 compound bonder that develops high strength on a wide range of substrates and is resistant to water. This general purpose adhesive isideal for bonding glass and display panels due to its very clear bond line.Loctite3430 A&B Fast...

AeroShell Grease 7 is an advanced multi-purpose grease, composed of synthetic oil thickened with Microgel®, possessing good load carrying ability over a wide temperature range. It is inhibited against corrosion and has excellent resistance to water...

Loctite 4850 is an instant adhesive, ideal for the assembly of difficult to bond material. This low viscosity is specifically formulated to provide flexible bond lines. Loctite4850 Instant Bonding Bendable Joints20g Brand Type Size Material Safety...

Molykote 1000 Anti-Seize Paste is a solid lubricant and a lead and nickel free paste used on threaded fasteners and other metal on metal joints to minimise wear and friction. Molykote has been a leader in lubrication technology for decades, and their...

Molykote D-Paste is a light coloured paste for assembly and running-in of metallic components. This solid lubricant paste offers excellent protection against galling and fretting corrosion. The service temperature range is -25°C to +250°C. ...

Molykote E-Paste is a high-load/high-wear durability paste developed specifically for plastic components. This synthetic oil based paste can be used with plastic-on-plastic, metal-on-plastic or plastic-on-metal friction parts MolykoteE Paste1Kg Brand...

KluberIsoflex LDS 18 Special A400gBrandTypeSizeTechnical Data SheetsTechnical Data Sheet: 

Klübersynth UH1 14-1600 370g is a premium, high-performance synthetic lubricating grease made for use in the food and pharmaceutical processing sector. This grease actively contributes to the support of food safety in machines and applications where...

Molykote 1000 Anti-Seize Paste is a solid lubricant and a lead and nickel free paste used on threaded fasteners and other metal on metal joints to minimise wear and friction. Molykote has been a leader in lubrication technology for decades, and their...

Molykote HSC Plus is a solid lubricant paste that contains no nickel or lead. This paste is designed for metal/metal combinations that are subject to high temperatures. The service temperature range is -30°C to +1100°C MolykoteHSC Plus Paste1kg...

We offer the innovative Shell Heat Transfer Oil S2, a premium-grade heat transfer fluid designed to meet the demanding needs of modern industries. Shell Heat Transfer Oil S2 is based on carefully selected, highly refined mineral oils chosen for their...

The LGWM 1 are greases that perform excellent under extreme pressure and low temperature. They are composed by mineral oil and lithium soap. The range of temperature which they work the best is between -30°C and 110°C equivalent to -20°F to...

Loctite 7471 is a transparent liquid activator that is designed to increase the cure speed of anaerobic products under low prevailing temperatures. Loctite7471 Activator Aerosol150ml Brand Type Size Material Safety & Technical Data Sheets ...

Loctite 401 general purpose, low viscosity adhesive is used for the assembly of difficult to bond materials that require uniform stress distribution and high tensile and shear strength. This instant adhesive provides rapid bonding of a wide range of...

Shell Rhodina Grease BBZ is specifically designed for high demanding outdoor applications, in particular when protection against false brinelling and fretting corrosion is required - even at very low temperatures. > ShellRhodina BBZ12 x 380g Brand...

KluberKluberlub BE 41-542400gBrandTypeSizeTechnical Data SheetsTechnical Data Sheet: 

The SKF LGEM is a high viscosity lubricant composed by a mineral oil base, using lithium soap. It is resistent to harsh conditions such as intense vibrations, slow rotations or high loads. It has good characteristics such as high oxidation stability and...

Dow Corning 3140 is a room temperature curing coating suitable for the protection of corrosion sensitive components and rigid, flexible circuit boards.Dow Corning3140 RTV Coating310mlBrandTypeSizeMaterial Safety & Technical Data SheetsMaterial Safety...

KluberCentoplex 3400gBrandTypeSizeTechnical Data SheetsTechnical Data Sheet: 

Molykote G-Rapid Plus Spray is a lubricant designed for the assembly and running-in of metal components. This specialty lubricant has a service temperature range of -35°C to +450°C MolykoteG-Rapid Plus Spray400ml Brand Type Size Material...

KluberKluberfood NH1 94-402400g Brand Type Size Technical Data Sheets Technical Data Sheet:  

Loctite 511 thread sealant is a low strength, general purpose sealant that cures in the absence of air and by contact with metals when confined within threads up to M80/R3"Loctite511 Low Strength Fast Cure Pipeseal 50ml BrandTypeSizeMaterial Safety &...

Loctite 572 is a medium strength thread sealant suitable for coarse threads and thread sizes up to M80, this methacrylate based sealant is ideal for metal pipes and fittings.Loctite572 Low Strength Slow Cure Pipe Seal50mlBrandTypeSizeMaterial Safety &...

KluberKlubergrease BE 71-461400gBrandTypeSizeTechnical Data SheetsTechnical Data Sheet: 

Dow Corning 732 general purpose adhesive is ideal for industrial sealing and bonding applications. This silicone sealant is easy to apply and cures at room temperature when exposed to moisure in the air. It has a service temperature of -60°C to...

Loctite 3295 is a general purpose, 2 part structural bonding liquid premix suitable for bonding metals, plastics and ceramics. It has a service temperature range of up to +120°C.Loctite3295 General Purpose 50ml BrandTypeSizeMaterial Safety &...

Discover the Klüberplex BEM 41-132 400g, an exceptional high-temperature and long-term rolling bearing grease. Klüberplex BEM-41-132 400g is a blend of synthetic hydrocarbon oil and mineral oil, with a unique lithium soap formulation. The incorporation...

Loctite 3423 is a high viscosity, 2 part, structural bonder that cures at room temperature. This general purpose adhesive offers excellent chemical resistance and is ideal for gap filling or vertical applications due to its thixotropic properties...

Loctite 3491 is a high transparency, medium viscosity adhesive that offers high, on-demand curing speed and is suited to plastics, ceramics, glass and metals.Loctite3491 Bonding Glass and Other Substrates (Ultra Clear)25mlBrandTypeSizeMaterial Safety &...

Molykote 111 silicone based compound has a heavy consistency, and is used for pressure plug valves, water softners and control valve lubrication. This compound can be used as an anti-stick to prevent gaskets from sticking to metals and resists weathering...

Shell Gadus S5 T460 Grease is a high performance, high temperature, long life grease for heavy duty industrial applications. It uses fully synthetic base stocks and the latest technology diurea thickener. It contains the latest additives to offer...

KluberIsoflex Super LDS 1845gBrandTypeSizeTechnical Data SheetsTechnical Data Sheet: 

The SKF LGGB 2 grease is biodegradable, offers low toxicity and is composed by a synthetic ester oil base, using a lithium-calcium thickener. These type of lubricants are perfect for spherical plain bearings, ball bearings and rollers bearings. They...

KluberGrafloscon C-SG 0 Ultra400gBrandTypeSizeTechnical Data SheetsTechnical Data Sheet: 

Kluber Kluberpaste 46 MR 401 60g Brand Type Size Technical Data Sheets Technical Data Sheet:  

Molykote multigliss dispersion is a composition or mineral oils, solid lubricants and stabilizers, designed for lubrication and rust loosening properties. MolykoteMultigliss Spray400ml Brand Type Size Material Safety & Technical Data Sheets ...

Shell Gadus S3 V220C greases are premium multi-purpose greases based on high viscosity index mineral oil and a lithium complex soap thickener. They contain the latest additives to offer excellent high temperature oxidation performance and other additives...

Kluber Isoflex NBU 15 is a high-speed spindle bearing grease specifically designed for applications requiring excellent high-speed and low-temperature performance. It is commonly used in precision instruments, machine tools, and equipment where smooth...

Kluber Isoflex NBU 15 50g Brand Type Size Technical Data Sheets Technical Data Sheet:  

Shell Helix Ultra Professional AF 5W-30 is designed to meet the demanding requirements of particular high-performance engines, including Ford and those requiring ACEA A5/B5. ShellHelix Ultra Professional AF 5W-305L Brand Type Size Material Safety...

Loctite 480 is an instant adhesive, ideal for bonding metal to metal, rubber or magnets.Loctite480 Instant Adhesive Black / Toughened 20g BrandTypeSizeMaterial Safety & Technical Data SheetsMaterial Safety Data Sheet:Technical Data Sheet:

Loctite 243 threadlocker is a medium strength, general purpose adhesive, suitable for securing and sealing nuts, bolts and studs to prevent loosening, this adhesive has a tolerance to slight contamination by industrial oils and cutting fluids.Loctite243...

Loctite 3922 is a transparant, low viscosity acrylic based adhesive that offers bonding to stress sensitive plastics. This adhesive can also be used to bond metals, glass and ceramics in seconds.Loctite3922 High Strength & Bendable/Deformable (Low...

Loctite 406 is a low viscosity bonder, ideal for plastics and rubber materials where instant adhesion is required. When used with Loctite 770 primer adhesion of difficult to bond substrates becomes increasingly improved.Loctite406 Super Glue 50g...

Loctite 422 is a transparent, colourless adhesive, with a fixture time of 20 - 40 seconds . When used with Loctite 770 primer adhesion of metals, plastics and polyolefins become increasingly improved.Loctite422 Ethyl High...

Shell Gadus S2 V220 greases are high quality multipurpose, extreme pressure greases based on a blend of high viscosity index mineral oils and a lithium hydroxystreate soap thickenerand contain extreme pressure and other proven additives to enhance their...

Loctite 290 threadlocker is a medium/high strength liquid adhesive, this threadlocker is ideal for preassembled fasteners due to its low viscosity and capillary action.Loctite290 High Strength Penetrating 10ml BrandTypeSizeMaterial Safety & Technical...

Molykote 3400A is a heat curing, dry lubricant for metal/metal combinations invloving medium to heavy loads and slow to medium movements. This anti-friction coating offers excellent lubrication, excellent corrosion protection, whilst also being highly...

Shell Helix Ultra uses unique active cleansing technology to help high-performance engines operate at maximum efficiency by helping to protect them from power-robbing deposits and wear. It is suitable for even the longest OEM-recommended drain intervals...

AeroShell Oil Diesel Ultra is a fully synthetic, multigrade engine oil designed for use in the new generation of compression ignition (diesel) aviation piston engines. The formulation has been selected to be suitable in piston engines fuelled by Jet A or...

Loctite 2400 threadlocker is a medium strength adhesive that is suitable for securing and sealing bolts, nuts and studs to prevent loosening, this adhesive has a tolerance to slight contamination by industrial oils and cutting fluids.Loctite2400 Medium...

Loctite 603 high strength compound is ideal for use on bearings and other close fitting cylindrical parts. This retaining compound has a high tolerance to oil and it cures when confined between close fitting metal surfaces and in the absence of air...

Loctite 7840 general purpose parts cleaner is a concentrated biodegradable cleaner for use on a wide range of industrial cleaning applications. This cleaner contains no hazardous solvents and can be diluted with water.Loctite7840 Natural Blue 5ltr...

Loctite 8009 is an anti seize lubricant with graphite and calcium fluoride in a brush top form. This metal free lubricant provides outstanding lubrication to all metals and is resistant to extreme temperatures up to +1,315°C.Loctite8009 Heavy Duty...

Shell Gadus S1 V220 2 is a multi-purpose extreme pressure grease. ShellGadus S1 V220 2400g Brand Type Size Material Safety & Technical Data Sheets Material Safety Data Sheet: Technical Data Sheet:  

Shell Tonna S3 M oils are specially designed for the lubrication of machine tool slides, tables and feed mechanisms. Their enhanced tackiness and stick-slip characteristics are combined to offer superior frictional performance on slideways. They are...

KluberKlubersynth UH1 64-6250gBrandTypeSizeTechnical Data SheetsTechnical Data Sheet: 

AeroShell Fluid 3 is a general purpose mineral lubricating oil recommended for general lubrication of aircraft parts that require a light oil with good low temperature characteristics and a low freezing point. It is inhibited against oxidation and...

KluberIsoflex NCA 1550gBrandTypeSizeTechnical Data SheetsTechnical Data Sheet: 

Loctite 268 threadlocker is a high strength adhesive, suitable for securing and sealing nuts, bolts and studs to prevent loosening, this handy easy to use stick makes application easy while preventing dripping. This threadlocker is used to permanently...

Loctite 7455 instant bonding accelerator is designed to increase the cure speed of cyanoacrylate adhesives. Loctite 7455 Tak Pak Activator 150ml Brand Type Size Material Safety & Technical Data Sheets Material Safety Data...

KluberHotemp 2000400mlBrandTypeSizeTechnical Data SheetsTechnical Data Sheet: 

Molykote G-Rapid paste is a solid lubricant paste designed for the assembly and running-in of metal components. This specialty lubricant has a service temperature range of -35°C to +450°C MolykoteG-Rapid Plus Paste1Kg Brand Type Size ...

KluberGrafloscon CA Ultra400mlBrandTypeSizeTechnical Data SheetsTechnical Data Sheet: 

Molykote 55 is a silicone based O-Ring grease, designed to offer good corrosion protection and excellent oxidation resistance while delivering lubrication between rubber and metal parts in pneumatic aircraft, automotive systems. and has a wide service...

Dow Corning 3140 is a room temperature curing sealant, this grey non-flowing adhesive is suitable for sealing openings in housings and modules, adding mechanical stability to individual components and assembly of components on printed wiring boardsDow...

Dow Corning 736 heat resistant sealant is ideal for sealing and bonding applications exposed to temperatures that reach as high as 315°C. The heat resistant properties of this sealant make it ideal for aerospace gasketing, industrial ovens and bag...

KluberIsoflex Topas L 32370g Brand Type Size Technical Data Sheets Technical Data Sheet:  

Kluber Kluberpaste UH1 96-402 80g Brand Type Size Technical Data Sheets Technical Data Sheet:  

Loctite 770 surface preparation polyolefin primer is designed for difficult to bond plastics. This primer is not recommended in assemblies where high peel strength is required.Loctite770 Polyolefin Primer 10g BrandTypeSizeMaterial Safety & Technical Data...

Shell Tonna S3 M oils are specially designed for the lubrication of machine tool slides, tables and feed mechanisms. Their enhanced tackiness and stick-slip characteristics are combined to offer superior frictional performance on slideways. They are...

Kluberpaste HEL 46-450 750g is a black high-temperature screw paste for high-alloy steels. This high-performance lubricating paste consists of synthetic polyalkylene glycol, ester base oils, and various solid inorganic lubricants to meet the demanding...

When it comes to extending life and enhancing the performance of your bearings, you need a lubricant you can trust. Kluberplex BEM 34-132 400g is a speciality rolling bearing grease formulated with a base of mineral oil and aluminium complex...

AeroShell Turbine Oil 560 is a third generation, high performance, low coking 5mm²/s synthetic hindered ester oil incorporating a carefully selected and finely balanced combination of additives to improve thermal and oxidation stability. ...

KluberKluberlub BE 71-501400gBrandTypeSizeTechnical Data SheetsTechnical Data Sheet: 

This LGFQ2/0.4 is a synthetic oil based grease using complex calcium suphonate thickener technology, suitable for applications subject to high loads, fluctuating temeraptures and wet environments in the food and beverage industry. This grease offers...

The LHMT is designed for medium temperatures and dusty environments like those of cement and material handling industries. SKFMedium Temp LHMT 68 Oil125ml Brand Type Size Material Safety Data Sheet Material Safety Data Sheet:

Loctite 7061 is a non CFC solvent based clearner for plastics. This general purpose cleaner has been specifically formulated to prepare plastic components ready for bonding. Loctite7070 Cleaner Aerosol400ml Brand Type Size Material Safety &...

Kluber Isoflex Topas NB 52 400g Brand Type Size Technical Data Sheets Technical Data Sheet:  

Kluber Paraliq GTE 703 60g Brand Type Size Technical Data Sheets Technical Data Sheet:  

Shell Advance SX 2 (undyed, pre-diluted) is a premium quality lubricant for 2-stroke motorcycle engines. It guarantees very good engine protection and cleanliness, reliable control against exhaust systemblocking and reduces exhaust smoke. Shell Advance...

Shell Morlina S2 BL oils are special low viscosity, solvent refined mineral oil blended with zinc free additives, to provide extended performance in the high speed spindles of machine tools. ShellMorlina S2 BL 1020L Brand Type Size Material Safety...

The SKF LGFP 2 is a grease composed by non-toxic materials, based on medical white oil using an aluminium complex soap, and used by general purpose.They have a long life product value and offer high resistance to water, corrosion and high/low temperature...

This LGWA2/MR120 is a premium quality mineral oil based lithium complex grease, with extreme pressure performance. This grease offers excellent lubrication at peak temperatures up to 220°C (430°F) for short periods, protection of wheel bearings operating...

Loctite 7840 general purpose parts cleaner is a concentrated biodegradable cleaner for use on a wide range of industrial cleaning applications. This cleaner contains no hazardous solvents and can be diluted with water.Loctite7840 Natural Blue750ml...

Molykote 3400A is an air dry or heat curing, dry lubricant providing both excellent lubrication and excellent corrosion protection. This lead free anti-friction coating has a wide service temperature range from -200°C to +310°C Molykote3402C...

KluberIsoflex Topas NCA 152400g Brand Type Size Technical Data Sheets Technical Data Sheet:  

Loctite 407 is a ultra quick fix colourless adhesive, used for bonding small to medium parts to achieve fast curing when confined between close fitting surfaces. This instant adhesive is ideal for plastics and rubber materials.Loctite407 High Temperature...

Loctite 496 is a transparent, colourless adhesive, with a fixture time of 10 - 30 seconds. This rapid bonding product can be used on a wide range of materials including plastics, metals and elastomers.Loctite496 Methyl Medium Viscosity 20g...

Loctite 5203 is a gasketing product, because of the medium strength, this product is ideal fir machined metal flanges where semi-flexibility is required. Loctite5205 Medium Strength Flexible Sealant50ml Brand Type Size Material Safety &...